Record user acceptance of continuous slider preview in 1.1.2 build13

2026-10-22 00:55:37 +08:00
@@ -49,4 +49,4 @@ xcodebuild -project beatygril/beatygril.xcodeproj -scheme 'Wrapper Application'

 面板改为先在真实视图的宿主 action 内取得读写接口，修复控件一直禁用的问题。短脸改用76点下半脸闭合区域和鼻梁位移轴，下颌骨改为六组相邻轮廓半径的局部位移，移除旧脸框近似场；详见[分析](docs/analysis/短脸与下颌骨分析.md)。其余五项脸型仍保留近似实现，不能将局部算法恢复视为全部效果逐像素一致。

-1551项回归通过，含335项宿主适配、98项OSC和157项面板ASan检查；28种控制/原点组合均核验实际解剖位置，改变原点标签时逐字节一致。额外真实帧ASan专项886项通过，含重复基础用例。1.1.2（13）已完成正式签名、公证、票据、唯一正式路径安装及副本清理。Motion/FCP原生数值、重置和隔离画面响应已验证，Motion保存重开与撤销通过；按住滑杆时画布持续刷新的实际观感仍等待用户反馈。连续步进在松手前提交已通过独立模拟宿主验证，不能将它等同于每个鼠标事件都排出一帧。
+1551项回归通过，含335项宿主适配、98项OSC和157项面板ASan检查；28种控制/原点组合均核验实际解剖位置，改变原点标签时逐字节一致。额外真实帧ASan专项886项通过，含重复基础用例。1.1.2（13）已完成正式签名、公证、票据、唯一正式路径安装及副本清理。Motion/FCP原生数值、重置和隔离画面响应已验证，Motion保存重开与撤销通过；用户于2026-10-22实测确认“拖动中已持续更新”；未指定测试宿主，不扩张为两个宿主分别完成动态排帧验收。连续步进在松手前提交已通过独立模拟宿主验证，不能将它等同于每个鼠标事件都排出一帧。
@@ -85,6 +85,6 @@ FCP模板从 `Templates/大鱼人像美化/` 恢复，将 `.moef` 和 `Drop Zone

 正式Release已使用固定团队逐层签名，Apple公证Accepted `5f5ce378-8430-467b-ae97-048e6bc81573`，票据、Gatekeeper、通用架构和PluginKit正式路径全部通过。唯一正式安装APP为`/Library/Plug-Ins/FxPlug/beatygril.app`，模板moef SHA256为`e9fa97dc14323d0daa7d3d61b06a78ba4000a70ab9f5e67ebffd750d49df1e15`，TIFF逐字节一致。临时APP、旧APP和公证ZIP已清理，有界目录及现存Spotlight索引产品路径中仅发现正式APP，扫描错误0，不宣称扫描了所有卷。

-Motion/FCP原生验收范围及未完成项见`docs/verification/v1.1.2/native-qa.json`：数值、重置、隔离短脸/下颌骨响应通过；Motion撤销和保存关闭重开通过。连续步进已改为每步完整宿主action，模拟宿主确认鼠标松开前可发布中间设置；原生按住鼠标期间的画布时序仍待用户反馈。后续人脸素材和全AX只保留本机build，不是产品依赖或上传资源。
+Motion/FCP原生验收范围及未完成项见`docs/verification/v1.1.2/native-qa.json`：数值、重置、隔离短脸/下颌骨响应通过；Motion撤销和保存关闭重开通过。连续步进已改为每步完整宿主action，模拟宿主确认鼠标松开前可发布中间设置；用户于2026-10-22实测确认拖动中持续更新；未指定宿主，未测量逐事件排帧时序。后续人脸素材和全AX只保留本机build，不是产品依赖或上传资源。

-最终标签`v1.1.2`完整提交SHA为`e9fddda5e13042f761755762fa39dfe090853c6a`，已独立从远端恢复，158文件的bytes/blob/mode与strict/full fsck通过，产品目录与签名源码a2e33e8逐字节一致，无LFS或子模块，恢复临时目录已清理。详见`docs/verification/v1.1.2/final-tag-recovery.json`；后续main仅补交本次标签恢复报告。
+最终标签`v1.1.2`完整提交SHA为`e9fddda5e13042f761755762fa39dfe090853c6a`，已独立从远端恢复，158文件的bytes/blob/mode与strict/full fsck通过，产品目录与签名源码a2e33e8逐字节一致，无LFS或子模块，恢复临时目录已清理。详见`docs/verification/v1.1.2/final-tag-recovery.json`；后续main仅补充恢复报告和用户验收记录，产品源码保持不变。
@@ -62,7 +62,7 @@
    "build": "13",
    "Motion": "pass: native number/reset/undo and save-close-reopen; isolated shape/profile images inspected with identical geometry source",
    "FCP": "pass: formal load, number/reset and same-frame isolated short/jaw render",
-    "continuousPreview": "per-step host completion verified automatically; native held-mouse canvas timing pending user observation"
+    "continuousPreview": "pass: user confirmed held-drag continuous preview on 2026-10-22 (Asia/Shanghai), version1.1.2 build13; host not specified, per-event frame timing not instrumented"
  },
  "customParameter": {
    "id": 210,
@@ -10,7 +10,14 @@
    "status": "operator_confirmed",
    "performedByScript": false,
    "scopeDocument": "native-qa.json",
-    "heldMouseCanvasTiming": "pending user observation"
+    "heldMouseCanvasTiming": "User confirmed continuous visible updates while dragging on 2026-10-22 (Asia/Shanghai); host not specified, no per-event frame timing claim.",
+    "userConfirmation": {
+      "date": "2026-10-22",
+      "timezone": "Asia/Shanghai",
+      "response": "拖动中已持续更新",
+      "version": "1.1.2",
+      "build": "13"
+    }
  },
  "source": {
    "commit": "a2e33e8e00a99b95dc29d67a819cb0897eda5756",
@@ -27,7 +27,16 @@
  "continuousPreview": {
    "production": "Each changed continuous step finishes its FxPlug host action before mouse-up; repeated equal steps are deduplicated.",
    "automated": "Three intermediate snapshots published before gesture end; production view/controller exercised under action-scoped mock.",
-    "nativePointerObservation": "Pending user answer: CUA coordinate drag did not reliably exercise the displayed slider; no native mid-drag frame timing claim."
+    "nativePointerObservation": "User confirmed on 2026-10-22 (Asia/Shanghai): 拖动中已持续更新. Native held-drag visual behavior is accepted by the user; the host was not specified and per-event frame timing was not instrumented.",
+    "userAcceptance": {
+      "date": "2026-10-22",
+      "timezone": "Asia/Shanghai",
+      "version": "1.1.2",
+      "build": "13",
+      "response": "拖动中已持续更新",
+      "passed": true,
+      "scope": "User-observed continuous preview during held slider drag in at least one native host; does not establish separate held-drag acceptance in both Motion and FCP or a frame for every mouse event."
+    }
  },
  "limits": [
    "No claim that every mouse event is presented as a separate host frame. Host scheduling and render speed can coalesce rapid updates.",
@@ -127,3 +127,7 @@ Motion：独立普通视频项目，源PTS0、1920×1080/25fps/10秒，媒体通
 实际操作均在独立测试文档/时间线内：Motion最终版数值输入、重置同时更新slider/text、宿主撤销、切换输入不复活旧值、保存关闭重开（短脸0.5/下颌骨0）通过。相同几何源码在build11中已做单独短脸正负、下颌骨、停用同帧对照及侧脸/歪头图像检查；final build13继续沿用相同几何字节。FCP最终版原生面板启用、数值输入、单击重置同步显示、清零其他脸型后分别短脸1/下颌骨1的同帧画面响应通过。截图、完整AX和物理坐标差只留本机，不上传用户影像。

 连续预览：生产NSSlider continuous保持开启，view不再把整个拖动包在同一次controller action里；每个有效步进独立结束宿主参数上下文。模拟宿主中三个中间状态在mouse-up前完成发布（旧实现3失败，修复后通过）。CUA坐标拖动未能可靠操纵显示中的滑杆，未记录到可信的原生按住期间排帧证据，已请求用户直接观察；此项保留待反馈，不写作原生连续预览通过。快速更新可能被宿主合并，各项其余五类近似算法和全部组合不宣称原版逐像素一致。详细范围在verification/v1.1.2/native-qa.json。
+
+## 1.1.2 连续预览用户验收补充（2026-10-22）
+
+用户明确回复“拖动中已持续更新”，确认最终1.1.2（13）按住滑杆拖动时画面能够持续更新，关闭上节待反馈项。此项证据来自用户原生实测；未指定具体宿主，不声称两个宿主分别完成按住拖动验收，也没有测量每个鼠标事件的独立排帧。本次仅更新验收记录，不改变产品源码、安装版或既有发布标签。