Terminate expected analysis stops with SDK cancellation sentinel; 290 native checks pass

这个提交包含在:
mac 于 2026-11-02 01:20:41 +08:00 提交
1 父节点 c771a9274a
当前提交 6de86a8ec3
6 个文件已更改
+25 -13

没有与搜索条件相匹配的文件

+2 -2
查看文件
@@ -10,10 +10,10 @@
仿射RANSAC细化容差改为3像素,并相应归一化残差置信度惩罚;只扩大容差而保留旧惩罚会在一致运动上过早低置信度停止。至少8内点、52%一致运动、最低0.3置信度、非线状分布、单步缩放/旋转和累计变换保护仍保留。未采用丢失后复制坐标伪造轨迹。新增确定平移、2.15像素非刚性残差和10%离群对应点的拟合检查;另有真实CPU/Metal图像光流、画面切换和平坦区域拒绝。
第一帧开始立即显示进度。失跟按特征不足、运动不一致、置信度、出画或变换问题区分,说明保留的可信帧数。普通失跟/主动取消停止时不再主动向宿主传递错误对象;引擎、无效源图和时序错误仍明确失败。是否消除FCP错误弹窗以正式宿主验收为准。
第一帧开始立即显示进度。失跟按特征不足、运动不一致、置信度、出画或变换问题区分,说明保留的可信帧数。普通失跟、主动取消、单帧完成和边界停止使用SDK的 `FxPlugErrorDomain / kFxError_UserCancelled` 正常取消标记,既结束宿主后台任务又不弹错误;引擎、无效源图和时序错误仍明确失败。27版候选仅返回NO/nil时,FCP的诊断分析残留在50%并影响退出,已在28版修复;不能把本地trackingActive清理当作宿主任务已结束。SDK证据见本机FxTypes.h的UserCancelled说明。正式宿主须确认任务回到闲置、可再次启动和正常退出。
## 验证与边界
候选Release原生285项通过,包含真实Metal采样检查与三组新增中间启动回调检查;独立19项通过。用户同一素材的离线1280×720灰度分析覆盖首帧正向285帧、中间正向193帧、中间反向93帧。这里只承诺对应的分析范围完成,灰度解码与宿主半浮点源采样不完全相同,也不以“跟完”代替轮廓/漂移质量验证。正式安装后继续FCP验证同一素材和独立切换画面用例。
28版候选Release原生290项通过,包含真实Metal采样、三组新增中间启动回调和五组SDK正常终止检查;独立19项通过。用户同一素材的离线1280×720灰度分析覆盖首帧正向285帧、中间正向193帧、中间反向93帧。这里只承诺对应的分析范围完成,灰度解码与宿主半浮点源采样不完全相同,也不以“跟完”代替轮廓/漂移质量验证。正式安装后继续FCP验证同一素材和独立切换画面用例。
原始媒体、FCPXML快照、作者状态和解码帧均仅在本机验收缓存,普通Git只保存聚合结果与通用诊断源码。未修改父“大鱼调色盘”或Color Finale。不是人物分割/非刚性逐点描边;转身、遮挡、变形和出画仍可能需要手工调整后从当前帧继续。新增工具标量和透视/剪切等既有边界保持。
+5 -3
查看文件
@@ -1,9 +1,9 @@
{
"status": "native-validated-awaiting-formal-host",
"version": "1.4.2",
"build": "27",
"build": "28",
"baselineSource": "847a5ea99903c0b7427301c799e1c40f3fe6c5ad",
"nativeChecks": 285,
"nativeChecks": 290,
"independentChecks": [
{
"pass": true,
@@ -214,5 +214,7 @@
"check": "external-activation-main-loop-responsive",
"maximumGapMS": 178.33579168654978,
"context": "Initial run overlapped diagnostic decoding; quiet complete repeat285/285 passed. No test threshold changed."
}
},
"quietTermination": "FxPlugErrorDomain/kFxError_UserCancelled SDK sentinel for expected loss, cancel, single step, boundary and late frames; five native lifecycle checks pass; formal FCP task-idle verification pending",
"candidate27Rejected": "NO/nil suppressed the modal but left the diagnostic host background analysis at 50%; candidate not released. Own diagnostic task canceled normally before host quit."
}
+9 -4
查看文件
@@ -54,22 +54,27 @@
- (BOOL)stopToolAnalysis:(NSString*)message error:(NSError**)error {
if(message){[_trackingMessage release];_trackingMessage=[message copy];if(error)*error=[NSError errorWithDomain:@"com.dayu.color.tracking" code:2 userInfo:@{NSLocalizedDescriptionKey:message}];}[self cleanupAnalysis:nil];return NO;
}
- (BOOL)finishToolAnalysis:(NSString*)message error:(NSError**)error {
// FxAnalyzer's quiet cancellation is an explicit SDK error sentinel. A bare
// NO/nil can leave FCP's background analysis task active after our cleanup.
[self stopToolAnalysis:message error:nil];if(error)*error=[NSError errorWithDomain:FxPlugErrorDomain code:kFxError_UserCancelled userInfo:@{NSLocalizedDescriptionKey:message?:@"本次跟踪已结束"}];return NO;
}
- (BOOL)desiredAnalysisTimeRange:(CMTimeRange*)out forInputWithTimeRange:(CMTimeRange)input error:(NSError**)error {
CMTime end=CMTimeRangeGetEnd(input),ref=_trackingReferenceTime,step=_trackingFrameDuration;if(!CMTIME_IS_NUMERIC(input.start)||!CMTIME_IS_NUMERIC(end)||!CMTIME_IS_NUMERIC(ref)||ref.epoch!=input.start.epoch||ref.epoch!=end.epoch||CMTimeCompare(ref,input.start)<0||CMTimeCompare(ref,end)>=0||!CMTIME_IS_NUMERIC(step)||step.value<=0)return [self stopToolAnalysis:@"跟踪起点或帧长无效" error:error];
CMTime lo=_trackingBackward?input.start:ref,hi=_trackingBackward?CMTimeAdd(ref,step):end;if(_trackingSingle){if(_trackingBackward){lo=CMTimeSubtract(ref,step);if(CMTimeCompare(lo,input.start)<0)lo=input.start;}else hi=CMTimeAdd(ref,CMTimeMultiply(step,2));}if(CMTimeCompare(hi,end)>0)hi=end;if(_trackingBackward&&CMTimeCompare(ref,input.start)==0)return [self stopToolAnalysis:@"已到片段边界,未产生新轨迹" error:error];*out=CMTimeRangeFromTimeToTime(lo,hi);return out->duration.value>0;
CMTime lo=_trackingBackward?input.start:ref,hi=_trackingBackward?CMTimeAdd(ref,step):end;if(_trackingSingle){if(_trackingBackward){lo=CMTimeSubtract(ref,step);if(CMTimeCompare(lo,input.start)<0)lo=input.start;}else hi=CMTimeAdd(ref,CMTimeMultiply(step,2));}if(CMTimeCompare(hi,end)>0)hi=end;if(_trackingBackward&&CMTimeCompare(ref,input.start)==0)return [self finishToolAnalysis:@"已到片段边界,未产生新轨迹" error:error];*out=CMTimeRangeFromTimeToTime(lo,hi);return out->duration.value>0;
}
- (BOOL)setupAnalysisForTimeRange:(CMTimeRange)range frameDuration:(CMTime)duration error:(NSError**)error {
if(!CMTIME_IS_NUMERIC(duration)||duration.value<=0||duration.epoch!=0)return [self stopToolAnalysis:@"宿主分析帧长无效" error:error];_trackingFrameDuration=duration;_trackingPreviousTime=kCMTimeInvalid;_trackingFlip=NO;[_trackingSamples removeAllObjects];auto backend=DYToolCreateMetalFlow([[NSBundle bundleForClass:self.class]URLForResource:@"default" withExtension:@"metallib"],error);if(!backend)return [self stopToolAnalysis:@"Metal 跟踪后端无法启动" error:error];_toolTracker.setBackend(backend);
std::vector<dy::FlowPoint>polygon;NSData *nodes=_trackingCandidate[@"nodes"];if(_trackingSeed.kind==DYMaskBezier){auto path=dyFlattenMask((const DYBezierNode*)nodes.bytes,nodes.length/sizeof(DYBezierNode));for(int i=0;i<path.count;i++)polygon.push_back({path.x[i],path.y[i]});}else if(_trackingSeed.kind==DYMaskRectangle)polygon={{-.5f,-.5f},{.5f,-.5f},{.5f,.5f},{-.5f,.5f}};else for(int i=0;i<128;i++){float angle=i*(2.f*M_PI/128);polygon.push_back({.5f*std::cos(angle),.5f*std::sin(angle)});}_toolTracker.setMask(std::move(polygon));return YES;
}
- (BOOL)analyzeFrame:(FxImageTile*)tile atTime:(CMTime)time error:(NSError**)error {
if(!_trackingActive.load()||_trackingFinishing.load())return NO;_trackingInFrame.store(true);@try{
if(_trackingCancelled.load())return [self stopToolAnalysis:@"已取消;保留最后连续可信轨迹" error:nil];if(_trackingSingle&&_trackingSamples.count>=2)return [self stopToolAnalysis:nil error:nil];if(_trackingSamples.count>=DYToolKeyLimit)return [self stopToolAnalysis:@"轨迹已到数量上限,保留已完成部分" error:error];
if(!_trackingActive.load()||_trackingFinishing.load()){if(error)*error=[NSError errorWithDomain:FxPlugErrorDomain code:kFxError_UserCancelled userInfo:nil];return NO;}_trackingInFrame.store(true);@try{
if(_trackingCancelled.load())return [self finishToolAnalysis:@"已取消;保留最后连续可信轨迹" error:error];if(_trackingSingle&&_trackingSamples.count>=2)return [self finishToolAnalysis:nil error:error];if(_trackingSamples.count>=DYToolKeyLimit)return [self finishToolAnalysis:@"轨迹已到数量上限,保留已完成部分" error:error];
CMTime expected=CMTIME_IS_NUMERIC(_trackingPreviousTime)?(_trackingBackward?CMTimeSubtract(_trackingPreviousTime,_trackingFrameDuration):CMTimeAdd(_trackingPreviousTime,_trackingFrameDuration)):_trackingReferenceTime;if(!CMTIME_IS_NUMERIC(time)||time.epoch!=expected.epoch||CMTimeCompare(time,expected)!=0)return [self stopToolAnalysis:@"宿主帧序列不连续,停在最后可信帧" error:error];
dy::GrayFrame frame=[self toolGrayFrame:tile error:error];if(!frame.valid())return [self stopToolAnalysis:@"宿主未返回完整源画面" error:error];
if(!_trackingSamples.count){if(_trackingReferenceFrame.valid()&&frame.width==_trackingReferenceFrame.width&&frame.height==_trackingReferenceFrame.height){double same=0,flip=0;size_t count=0;for(int y=0;y<frame.height;y+=8)for(int x=0;x<frame.width;x+=8){float p=frame.pixels[y*frame.width+x];same+=fabs(p-_trackingReferenceFrame.pixels[y*frame.width+x]);flip+=fabs(p-_trackingReferenceFrame.pixels[(frame.height-1-y)*frame.width+x]);count++;}same/=MAX(size_t(1),count);flip/=MAX(size_t(1),count);_trackingFlip=flip<.035&&flip+.008<same&&flip<same*.8;}os_log(OS_LOG_DEFAULT,"dayu_tool_track_seed width=%{public}d height=%{public}d flip=%{public}d time=%{public}.6f",frame.width,frame.height,(int)_trackingFlip,CMTimeGetSeconds(time));}
if(_trackingFlip)for(int y=0;y<frame.height/2;y++)for(int x=0;x<frame.width;x++)std::swap(frame.pixels[y*frame.width+x],frame.pixels[(frame.height-1-y)*frame.width+x]);
if(!_trackingSamples.count){if(!_toolTracker.reset(frame,{_trackingSeed.centerX,_trackingSeed.centerY,_trackingSeed.width,_trackingSeed.height,_trackingSeed.angle}))return [self stopToolAnalysis:@"蒙版内纹理不足,未生成不可靠轨迹" error:error];}else if(!_toolTracker.track(frame).valid){auto lost=_toolTracker.result();NSString *reason=@"区域内运动不一致";switch(lost.failure){case dy::TrackFailure::InsufficientMatches:reason=@"可用特征点不足";break;case dy::TrackFailure::LowConfidence:reason=@"运动可信度不足";break;case dy::TrackFailure::OutsideFrame:reason=@"目标已离开画面";break;case dy::TrackFailure::InvalidTransform:reason=@"运动变换过大";break;case dy::TrackFailure::Backend:case dy::TrackFailure::InvalidFrame:reason=@"源画面或跟踪引擎异常";break;default:break;}os_log(OS_LOG_DEFAULT,"dayu_tool_track_loss time=%{public}.6f reason=%{public}d features=%{public}d matches=%{public}d inliers=%{public}d confidence=%{public}.3f residual=%{public}.3f",CMTimeGetSeconds(time),(int)lost.failure,lost.features,lost.matches,lost.inliers,lost.confidence,lost.medianError);return [self stopToolAnalysis:[NSString stringWithFormat:@"%@,已保留 %lu 帧可信轨迹;可调整蒙版后从此处继续",reason,(unsigned long)_trackingSamples.count] error:nil];}
if(!_trackingSamples.count){if(!_toolTracker.reset(frame,{_trackingSeed.centerX,_trackingSeed.centerY,_trackingSeed.width,_trackingSeed.height,_trackingSeed.angle}))return [self finishToolAnalysis:@"蒙版内纹理不足,原蒙版已保留" error:error];}else if(!_toolTracker.track(frame).valid){auto lost=_toolTracker.result();NSString *reason=@"区域内运动不一致";switch(lost.failure){case dy::TrackFailure::InsufficientMatches:reason=@"可用特征点不足";break;case dy::TrackFailure::LowConfidence:reason=@"运动可信度不足";break;case dy::TrackFailure::OutsideFrame:reason=@"目标已离开画面";break;case dy::TrackFailure::InvalidTransform:reason=@"运动变换过大";break;case dy::TrackFailure::Backend:case dy::TrackFailure::InvalidFrame:reason=@"源画面或跟踪引擎异常";break;default:break;}os_log(OS_LOG_DEFAULT,"dayu_tool_track_loss time=%{public}.6f reason=%{public}d features=%{public}d matches=%{public}d inliers=%{public}d confidence=%{public}.3f residual=%{public}.3f",CMTimeGetSeconds(time),(int)lost.failure,lost.features,lost.matches,lost.inliers,lost.confidence,lost.medianError);return [self finishToolAnalysis:[NSString stringWithFormat:@"%@,已保留 %lu 帧可信轨迹;可调整蒙版后从此处继续",reason,(unsigned long)_trackingSamples.count] error:error];}
auto result=_toolTracker.result();DYMaskParameters p=DYMaskAtTime(_trackingFrozenMask,time);p.centerX=result.cx;p.centerY=result.cy;p.width=_trackingSeed.width*result.scaleX;p.height=_trackingSeed.height*result.scaleY;p.angle=_trackingSeed.angle+result.rotation;if(!dyValidMaskParameters(p))return [self stopToolAnalysis:@"跟踪变换无效,未写入错误结果" error:error];[_trackingSamples addObject:DYMaskKey(time,p,NO,result.confidence)];_trackingPreviousTime=time;
if(_trackingSamples.count==1||_trackingSamples.count%15==0)[self toolStatus:[NSString stringWithFormat:@"已分析 %lu 帧 · 置信度 %.0f%%",(unsigned long)_trackingSamples.count,result.confidence*100]];return YES;
}@finally{_trackingInFrame.store(false);}
@@ -12,9 +12,14 @@
run.record(@"tracking-results-use-one-undo-action",base->_undoStarts==undoBefore+1&&base->_undoStarts==base->_undoEnds);int writes=base->_undoStarts;[plugin cleanupAnalysis:nil];[plugin cleanupAnalysis:nil];drain();run.record(@"duplicate-analysis-cleanup-never-commits-twice",base->_undoStarts==writes);
// Mid-analysis author edits must reject the result rather than clobber them.
capture(0);request(1);callbacks=[plugin desiredAnalysisTimeRange:&desired forInputWithTimeRange:inputRange error:nil]&&[plugin setupAnalysisForTimeRange:desired frameDuration:timeAt(1) error:nil];for(int i=0;i<3&&callbacks;i++){setFrame(i);callbacks&=[plugin analyzeFrame:frame atTime:timeAt(i) error:nil];}NSMutableDictionary *changed=DYMutablePlist(DYReadTools(base,kCMTimeZero).document);changed[@"baseMasks"][@"hsl"][0][@"enabled"]=@NO;DYWriteTools(base,changed,kCMTimeZero);[plugin cleanupAnalysis:nil];drain();run.record(@"stale-analysis-cannot-overwrite-edited-mask",[DYReadTools(base,kCMTimeZero).document isEqual:changed]&&base->_undoStarts==writes);
DYWriteTools(base,doc,kCMTimeZero);capture(0);request(1);callbacks=[plugin desiredAnalysisTimeRange:&desired forInputWithTimeRange:inputRange error:nil]&&[plugin setupAnalysisForTimeRange:desired frameDuration:timeAt(1) error:nil];for(int i=0;i<3&&callbacks;i++){setFrame(i);callbacks&=[plugin analyzeFrame:frame atTime:timeAt(i) error:nil];}request(9);setFrame(3);BOOL stopped=![plugin analyzeFrame:frame atTime:timeAt(3) error:nil];drain();tracked=DYReadTools(base,kCMTimeZero).document[@"baseMasks"][@"hsl"][0];run.record(@"cancel-keeps-only-contiguous-trusted-segment",callbacks&&stopped&&[tracked[@"keys"]count]==3&&base->_undoStarts==writes+1);
DYWriteTools(base,doc,kCMTimeZero);capture(0);request(1);callbacks=[plugin desiredAnalysisTimeRange:&desired forInputWithTimeRange:inputRange error:nil]&&[plugin setupAnalysisForTimeRange:desired frameDuration:timeAt(1) error:nil];for(int i=0;i<3&&callbacks;i++){setFrame(i);callbacks&=[plugin analyzeFrame:frame atTime:timeAt(i) error:nil];}request(9);setFrame(3);NSError *cancelError=nil;BOOL stopped=![plugin analyzeFrame:frame atTime:timeAt(3) error:&cancelError];drain();tracked=DYReadTools(base,kCMTimeZero).document[@"baseMasks"][@"hsl"][0];run.record(@"cancel-keeps-only-contiguous-trusted-segment",callbacks&&stopped&&[tracked[@"keys"]count]==3&&base->_undoStarts==writes+1);run.record(@"cancel-sends-sdk-quiet-analysis-termination",[cancelError.domain isEqual:FxPlugErrorDomain]&&cancelError.code==kFxError_UserCancelled);
DYWriteTools(base,doc,kCMTimeZero);capture(2);host->_state=kFxAnalysisState_NotAnalyzing;request(0);callbacks=[plugin desiredAnalysisTimeRange:&desired forInputWithTimeRange:inputRange error:nil]&&[plugin setupAnalysisForTimeRange:desired frameDuration:timeAt(1) error:nil];for(int i=2;i<6&&callbacks;i++){setFrame(i);callbacks&=[plugin analyzeFrame:frame atTime:timeAt(i) error:nil];}[plugin cleanupAnalysis:nil];drain();BOOL backward=host->_backwardStarts==1;callbacks&=[plugin desiredAnalysisTimeRange:&desired forInputWithTimeRange:inputRange error:nil]&&[plugin setupAnalysisForTimeRange:desired frameDuration:timeAt(1) error:nil];for(int i=2;i>=0&&callbacks;i--){setFrame(i);callbacks&=[plugin analyzeFrame:frame atTime:timeAt(i) error:nil];}[plugin cleanupAnalysis:nil];drain();tracked=DYReadTools(base,kCMTimeZero).document[@"baseMasks"][@"hsl"][0];run.record(@"bidirectional-passes-share-reference-and-merge-once",callbacks&&backward&&[tracked[@"keys"]count]==6&&base->_undoStarts==writes+2);
DYWriteTools(base,doc,kCMTimeZero);capture(2);host->_state=kFxAnalysisState_NotAnalyzing;request(-2);BOOL range=[plugin desiredAnalysisTimeRange:&desired forInputWithTimeRange:inputRange error:nil]&&CMTimeCompare(desired.start,timeAt(1))==0&&CMTimeCompare(desired.duration,timeAt(2))==0;[plugin setupAnalysisForTimeRange:desired frameDuration:timeAt(1) error:nil];for(int i=2;i>=1;i--){setFrame(i);[plugin analyzeFrame:frame atTime:timeAt(i) error:nil];}setFrame(0);stopped=![plugin analyzeFrame:frame atTime:timeAt(0) error:nil];drain();tracked=DYReadTools(base,kCMTimeZero).document[@"baseMasks"][@"hsl"][0];run.record(@"backward-single-step-includes-reference-and-one-neighbor",range&&stopped&&[tracked[@"keys"]count]==2);
DYWriteTools(base,doc,kCMTimeZero);capture(2);host->_state=kFxAnalysisState_NotAnalyzing;request(-2);BOOL range=[plugin desiredAnalysisTimeRange:&desired forInputWithTimeRange:inputRange error:nil]&&CMTimeCompare(desired.start,timeAt(1))==0&&CMTimeCompare(desired.duration,timeAt(2))==0;[plugin setupAnalysisForTimeRange:desired frameDuration:timeAt(1) error:nil];for(int i=2;i>=1;i--){setFrame(i);[plugin analyzeFrame:frame atTime:timeAt(i) error:nil];}setFrame(0);NSError *singleStopError=nil;stopped=![plugin analyzeFrame:frame atTime:timeAt(0) error:&singleStopError];drain();tracked=DYReadTools(base,kCMTimeZero).document[@"baseMasks"][@"hsl"][0];run.record(@"backward-single-step-includes-reference-and-one-neighbor",range&&stopped&&[tracked[@"keys"]count]==2);run.record(@"single-step-sends-sdk-quiet-analysis-termination",[singleStopError.domain isEqual:FxPlugErrorDomain]&&singleStopError.code==kFxError_UserCancelled);
// An expected loss must end the host job, not only our local tracking state.
DYWriteTools(base,doc,kCMTimeZero);capture(0);request(1);callbacks=[plugin desiredAnalysisTimeRange:&desired forInputWithTimeRange:inputRange error:nil]&&[plugin setupAnalysisForTimeRange:desired frameDuration:timeAt(1) error:nil];for(int i=0;i<3&&callbacks;i++){setFrame(i);callbacks&=[plugin analyzeFrame:frame atTime:timeAt(i) error:nil];}
Pixels flat(tw*th*4,.1f);for(size_t i=3;i<flat.size();i+=4)flat[i]=1;[[frame metalTextureForDevice:gpu]replaceRegion:MTLRegionMake2D(0,0,tw,th) mipmapLevel:0 withBytes:flat.data() bytesPerRow:tw*8];NSError *lossError=nil;stopped=![plugin analyzeFrame:frame atTime:timeAt(3) error:&lossError];drain();tracked=DYReadTools(base,kCMTimeZero).document[@"baseMasks"][@"hsl"][0];run.record(@"texture-loss-keeps-prefix-and-sends-sdk-quiet-termination",callbacks&&stopped&&[tracked[@"keys"]count]==3&&[lossError.domain isEqual:FxPlugErrorDomain]&&lossError.code==kFxError_UserCancelled);
DYWriteTools(base,doc,kCMTimeZero);capture(0);request(-1);NSError *boundaryError=nil;stopped=![plugin desiredAnalysisTimeRange:&desired forInputWithTimeRange:inputRange error:&boundaryError];drain();run.record(@"boundary-stop-sends-sdk-quiet-analysis-termination",stopped&&[boundaryError.domain isEqual:FxPlugErrorDomain]&&boundaryError.code==kFxError_UserCancelled);
NSError *lateError=nil;stopped=![plugin analyzeFrame:frame atTime:timeAt(0) error:&lateError];run.record(@"late-analysis-frame-also-terminates-host-job-quietly",stopped&&[lateError.domain isEqual:FxPlugErrorDomain]&&lateError.code==kFxError_UserCancelled);
// A host cache hit can move the playhead without re-entering renderDestinationImage.
// Starting at a middle frame must use analyzer input even on a fresh instance.
DYWriteTools(base,doc,kCMTimeZero);id<DYToolHostProbe>cold=(id)[[NSClassFromString(@"DYPlugIn")alloc]initWithAPIManager:host];host->_time=timeAt(2);host->_state=kFxAnalysisState_NotAnalyzing;int starts=host->_forwardStarts;
+1 -1
查看文件
@@ -19,7 +19,7 @@
<key>CFBundleShortVersionString</key>
<string>1.4.2</string>
<key>CFBundleVersion</key>
<string>27</string>
<string>28</string>
<key>NSHumanReadableCopyright</key>
<string></string>
<key>PlugInKit</key>
+1 -1
查看文件
@@ -19,7 +19,7 @@
<key>CFBundleShortVersionString</key>
<string>1.4.2</string>
<key>CFBundleVersion</key>
<string>27</string>
<string>28</string>
<key>LSMinimumSystemVersion</key>
<string>$(MACOSX_DEPLOYMENT_TARGET)</string>
<key>NSHumanReadableCopyright</key>